Navigation: 
Start
Door Interlocks
Double Swinging Doors
|
|
|
|
 |
|
|
RSB-2: Lock Complete (data sheet required)
Interlock for Double Swinging Doors with Door Partition & Stationary Cam
This is the same operation as the RSB except it has two independent locks. This lock is for applications which have a center obstruction, such as conveyor rails, overhead hoist, etc. Although there are two locks there is only one handle, for the active door.
When ordered complete the interlock comes with one straight drive bar, offset drive bar and pickup roller assembly (dimensions from data sheet prepared by customer), two locking bar assemblies and one door handle to be mounted to the active door on the hall side of the door.
Emergency release of the interlock is made with a KEB pull chain and box.
When ordering specify hand. The hand is determined by standing inside the elevator looking out. The side on which the lock is to be mounted (left or right) is the hand to be ordered.
A data sheet showing door height, width, thickness, running clearance, corner offsets and depth of jamb must accompany the order. (page 104)
These interlocks can be made with hermetically sealed contacts for NEMA 4, 12 (water/dust resistant), or NEMA 9 (hazardous location) applications.
Features
• All Solid Cast Parts • Heavy Duty Contacts • 250 Volts AC or DC • Self Wiping Contacts
NOTE: Upon receipt of your order you will receive a data sheet that must be filled out and returned to us before we can proceed with your order.
|
|
|
|
|
|
|
Product number: |
|
786-201
|
|
Unit of measure: |
|
each
|
|
|
|
