 |
|
ARC - Retiring Cam: (A) Water/Dust Resistant: 110 - 120VAC |
The C.J. Anderson Retiring Cam (ARC), made in the USA, is a self contained retractable cam. Its modular design permits replacement of all component parts in the field. This is a 2.75” wide by 12.25” long cam which can be used on any type of door lock. It is the easiest cam in the industry to install. It only requires two mounting bolts and a two wire hook-up. It has no motor, linkage or chains to adjust or break.
Among its other features are its sturdy construction of heavy gauge steel with a corrosion resistant clear zinc coating, dual wound coil which prevents overheating, and full 1 5/8” stroke to assure positive unlatching of any type door lock.
It can be used as a replacement for any motorized or retractable cam.
|
|
|
|
|
ARC - Retiring Cam: (B) Water/Dust Resistant: 110 - 120VDC |
|
|
|
|
|
ARC - Retiring Cam: (C)Water/Dust Resistant: 220VAC |
|
|
|
|
|
ARC - Retiring Cam: (D) Water/Dust Resistant: 220VDC |
|
|
|
|
|
ARC - Retiring Cam: (E) Water/Dust Resistant: 24VAC |
|
|
|
|
|
ARC - Retiring Cam: Explosion Proof: C1,D2: 110 - 120VAC |
These Units are manufactured with hermetically sealed contacts for hazardous locations requiring Class 1, Division 2 equipment.
|
|
|
|
|
ARC - Retiring Cam: Explosion Proof: C1,D2: 220VAC |
|
|
|
|
|
ARC - Retiring Cam: Explosion Proof: C1,D2: 220VDC |
|
|
|
|
|
ARC - Retiring Cam: Explosion Proof: C1,D2: 24VAC |
|
|
|
|
|
Cam Protection Timer (For ARC Cams Only) |
Cam protection timers are intended to be wired in between the retiring cam and the control circuit.
In some instances elevators are stopped between landings for long periods of time. When the retiring cam is energized, while out of the door zone, this timer will automatically cut the voltage to the unit allowing the retiring cam to drop and not stay energized.
1 - 5 Minute Timer - Voltage Range: 24-110
|
|
|
